Welcome to the home of the ' GA11-30 ' Atlas Copco Air Compressors

Welcome to the home of the ' GA11-30 '
Atlas Copco Air Compressors

GA 11-30C series, small in footprint.... big in performance
The GA 11-30C units are delivered to the site equipped with oil and are ready to go. To start the operation, just connect the compressor to its power source.

Capacities from 20 up to 75.5 l/s (42.4 - 160 cfm)
Available as Pack, WorkPlace® and Full Feature versions
Includes a superior electronic control, monitoring and communication system

The GA+ Workplace Air SystemTM provides industry leading performance and answers to all your advanced compressor control requirements. With its extremely low noise levels you can install the compressor anyplace that is most suitable and cost efficient.
The GA is by far the most reliable tank-mounted workshop solution, immediately ready to supply high quality air.

Air cooled rotary screw compressors
Free air delivery from 20 to 76 l/s, 42 to 160 cfm at 7 bar working pressure
Nominal working pressure variants from 7 to 13 bar
Motor size from 11 to 30 kW with options for either 50 or 60 Hz
Sound level 63 to 71 dB(A) dependent on model and according to Pneurop PN8NTC2.2 test code.

To learn every detail of this GA range of Rotary screw compressors click here ....

Please Note:

You will be taken to the Atlas Copco Compressors and Generators page you click on stationary compressors then Lubricated compressors then GA 11-30